Ankündigung

Einklappen
Keine Ankündigung bisher.

Hanfseile .....?

Einklappen
X
 
  • Filter
  • Zeit
  • Anzeigen
Alles löschen
neue Beiträge

    #31
    AW: Hanfseile .....?

    Dann auch noch mein Senf dazu. Wenn du noch nie gespleißt hast, lass es lieber. Einfach ist für einen Anfänger höchstens ein 3 kardeeliges Tau. Alles andere erfordert ein wenig Übung. Eine Kausch stramm in einen Augspleiß zu integrieren ist auch nicht einfach und "labberig" drinhängen sollte sie nicht. Also kauf einfach im Fachhandel ein Tau mit fertig eingesplester Kausch , so wie Du es auch vorhast. Zum nachgucken evtl. noch dieser Link: http://www.jack-tar.de/
    Schaf lügt

    Kommentar


      #32
      AW: Hanfseile .....?

      .....vielleicht hilft dann auch, anstatt einer Kausche, die Anbringung eines IOZ Chips??

      .......duck und wech
      ich habe gar keine Signatur...

      Kommentar


        #33
        AW: Hanfseile .....?

        Zitat von gkuehn Beitrag anzeigen
        Manila ist der englische Name für Hanf. Eine Manilarope ist also nichts weiter als ein englisch bezeichnetes Hanfseil. Ich hoffe Du hast für die Übersetzung nicht allzuviel ausgegeben.

        Grüße, Guido
        versteh den Witz nicht....(wenns denn einer sein sollte)
        m. W. gibt es Manila undHanfseile
        (die Manilapflanze ist keine Hanfpflanze, )
        C.

        Kommentar


          #34
          AW: Hanfseile .....?

          ..nachdem ich hier mal leise mitgelesen habe....habe ich auch ne Frage: Wie dick und wie lang sollte man das Seil des Manila nehmen.20m?..Bruchlast? bzw. das es nicht zuvoll vorne wird und sich noch gut um die Capstan legen läßt..bei ca 15cm Durchmesser? Was heißt Grad 1? ich finde die 220 Meter-Variante für mein Boot doch etwas arg...und kommt das Seil nicht ursprünglich aus Manila? Gibts da vielleicht ne lokale Spezi- Faser?
          lg h
          -------------------------
          Die Pattex Bruderschaft

          Kommentar


            #35
            AW: Hanfseile .....?

            Due to demand from customers, We now supply these ropes with a fitted hook

            27.5 m (approx 90 foot) of 3/4" (20mm) Natural Manila Capstan Winch rope for Aeroparts and Fairey Capstan Winches as fitted to Land Rovers. We have done extensive research, but have been unable to find a written specification for natural ropes on the above winches. Ridged bollard capstans are designed to use twisted natural rope and during our unscientific tests, at the Land Rover Series 2 Club International Rally, natural rope offered far more control than synthetic ropes. All of the 3 strand twisted synthetic ropes tested were damaged during our tests by the friction on the winch bollard. From information gathered from enthusiasts who have used these Capstans for work and pleasure, we have concluded that this is the correct natural rope for these winches.
            Fairey Winches do recommend that a ¾” 16 plait polyester rope is used and we also supply this type of rope, but all modern capstans, that use this rope, have smooth bollards.
            This Manila rope is the best quality and strongest natural rope available and is the correct size for use on the above winches. The rope has a breaking strain of 3.25 tonnes when new. The rope is oiled, but being a natural produce, its strength will deteriorate if it is not looked after and is allowed to rot. Always wear gloves when handling this rope and we recommend that before using this product, you receive full training in its use and the use of your capstan winch. We accept no liability for any injuries caused by using this product.
            For more great tools and equipment
            imperialtools.co.uk
            Zitierte Grüße,
            oijoijoij
            … but, at least, I am sober …

            Kommentar


              #36
              AW: Hanfseile .....?

              G4Dachträger RR LM für 600€ zu verkaufen

              Kommentar


                #37
                AW: Hanfseile .....?

                Da hilft nur dies...
                Jaja...OT.

                Gruß, Armin
                Angehängte Dateien

                Kommentar


                  #38
                  AW: Hanfseile .....?

                  Zitat von highway Beitrag anzeigen
                  ..nachdem ich hier mal leise mitgelesen habe....habe ich auch ne Frage: Wie dick und wie lang sollte man das Seil des Manila nehmen.20m?..Bruchlast? bzw. das es nicht zuvoll vorne wird und sich noch gut um die Capstan legen läßt..bei ca 15cm Durchmesser? Was heißt Grad 1? ich finde die 220 Meter-Variante für mein Boot doch etwas arg...und kommt das Seil nicht ursprünglich aus Manila? Gibts da vielleicht ne lokale Spezi- Faser?
                  lg h
                  hallo,
                  also wie diese Empfehlung von imperialtools habe ich ein Seil (und zwar MANILA und kein "hemp"=Hanf!)
                  von 30m Länge und 20mm Durchmesser
                  das passt noch recht gut um die Capstan und die Länge brauchts schon.
                  LR gibt im optional catal. 31,5mm (1 1/4 ") Durchmesser an,
                  das hab ich auch probiert, fand es aber viel zu dick, es ließ sich nicht gut (zweimal)um den bollard legen
                  Christian

                  Kommentar


                    #39
                    AW: Hanfseile .....?

                    Zitat von Armin Schagen Beitrag anzeigen
                    Da hilft nur dies...
                    Jaja...OT.

                    Gruß, Armin
                    Das wäre dann ein "Spleissbier" oder?

                    Hehehe, Helmuth

                    Kommentar

                    Lädt...
                    X